This system was assembled from a configuration shared in a public audio community. The photo is a staged composite for illustration, not the owner’s room, and the relative sizing of the components may be off.
This is a high-end stereo system built around floorstanding speakers and a single subwoofer, with a preamplifier, power amplifier and streamer. The subwoofer gently reinforces the speakers' own bass rather than replacing it, and the separate amplifiers give the towers firm control.
Traits and placement
Read from the component list, not from listening.
Price$8,030
$2,769$127,475
Bass extension30 Hz
47 Hz18 Hz
Lowest frequency response across the system’s components. Approximate — a component is excluded only when it declares an amplifier wattage without also declaring a sensitivity figure, so an amplifier that happens to report a sensitivity slips through and can pull the reading down.
Drive difficulty85.5 dB/W
99.0 dB/W85.0 dB/W
Speaker sensitivity normalised to 8 ohms. Approximate — we do not record whether a figure was quoted per watt or per 2.83 volts, so a non-8-ohm speaker can be out by up to 3 dB.
System Components
Signal Chain
Scroll sideways to follow the chain from source to speakers.
Signal chain complete — source to speakers
Accessories
Sources
Processing
Control
Amplification
Outputs
Cartridge
Tonearm
Turntable
Tuner
Music Server
Streamer
C
CD PlayerTransport + DAC
Digital Audio PlayerPortable Source + DAC
Phono Preamp
R
DAC
RC
Surround Processor
Preamp
R
Stereo ReceiverTuner + Amp
AV ReceiverProcessor + Amp
Power Amp
R
Multichannel Amp
Integrated AmpPreamp + Power Amp
Headphone Amp
Floorstanding
R
Bookshelf
Subwoofer
T
Center / Surround
Atmos
In-Wall / Ceiling
Powered SpeakerAmp + Speaker
T
Over-Ear
On-Ear
In-Ear
System Visualization
No products in this system
This system doesn't have any products yet.
Similar Systems
Systems with similar components and configurations
Built October 2026 · Updated 4 days ago · v1