This system was assembled from a configuration shared in a public audio community. The photo is a staged composite for illustration, not the owner’s room, and the relative sizing of the components may be off.
This is a two-channel stereo system for a small room, aimed at lively, full sound on a sensible budget. Its speakers, preamp, power amplifier, and turntable work together as a balanced, self-contained setup for vinyl listening.
Traits and placement
Read from the component list, not from listening.
Price$2,135
$2,135$127,475
Bass extension33 Hz
47 Hz18 Hz
Lowest frequency response across the system’s components. Approximate — a component is excluded only when it declares an amplifier wattage without also declaring a sensitivity figure, so an amplifier that happens to report a sensitivity slips through and can pull the reading down.
Drive difficulty87.0 dB/W
99.0 dB/W85.0 dB/W
Speaker sensitivity normalised to 8 ohms. Approximate — we do not record whether a figure was quoted per watt or per 2.83 volts, so a non-8-ohm speaker can be out by up to 3 dB.
System Components
Signal Chain
Scroll sideways to follow the chain from source to speakers.
Signal chain complete — source to speakers
Accessories
Sources
Processing
Control
Amplification
Outputs
Cartridge
R
Tonearm
R
Turntable
R
Tuner
Music Server
Streamer
CD PlayerTransport + DAC
Digital Audio PlayerPortable Source + DAC
Phono Preamp
1
DAC
Surround Processor
Preamp
1
Stereo ReceiverTuner + Amp
AV ReceiverProcessor + Amp
Power Amp
2
Multichannel Amp
Integrated AmpPreamp + Power Amp
Headphone Amp
Floorstanding
K
Bookshelf
Subwoofer
Center / Surround
Atmos
In-Wall / Ceiling
Powered SpeakerAmp + Speaker
Over-Ear
On-Ear
In-Ear
System Visualization
No products in this system
This system doesn't have any products yet.
Built October 2026 · Updated 4 days ago · v1