WATT 7 vs WATT 5
The WATT 5's sensitivity is 93 dB against the WATT 7's 92 dB. Both share impedance (4Ω), high-frequency extension (21 kHz), and woofer (8").
AI-generated product photo — not official manufacturer imagery.
LoudspeakersBookshelf SpeakersDiscontinued
About the WATT 7
The Wilson Audio WATT/Puppy Series 7 is a two-section, three-way loudspeaker system comprising the compact WATT upper module and the Puppy bass module. The WATT uses a 1-inch titanium-foil inverted-dome tweeter and a 7-inch midrange driver; the Puppy uses two 8-inch woofers. The crossover points are approximately 125 Hz and 2 kHz. The system has a nominal 4-ohm impedance, 92 dB sensitivity (2.83 V at 1 meter), a rated frequency response of 21 Hz–21 kHz (+0/−3 dB), and a minimum recommended amplifier power of 7 watts per channel. Each complete speaker measures approximately 40.25 inches high, 12.25 inches wide, and 18.5 inches deep; the WATT and Puppy sections weigh approximately 65 and 105 pounds, respectively. The WATT 7 is therefore the upper section of the WATT/Puppy 7 system rather than a conventional bookshelf loudspeaker. It was offered in Wilson Audio’s painted cabinet finishes.
Specifications
Transducer Specifications
Driver and acoustic performance characteristics
- Sensitivity
- 92 dB SPL @ 1W/1m
- Impedance
- 4Ω
- Frequency Response
- 21 Hz - 21 kHz
- Min. Amplifier Power
- 7W
Speaker Design
Driver configuration and enclosure design
- Configuration
- 3-way
- Driver Type
- dynamic
- Driver Size
- 8"
- Driver Count
- 4
- Enclosure Type
- sealed
- Crossover Frequency
- 2.0 kHz
Physical Dimensions
Size, weight, and appearance
- Dimensions
- 311.15 × 1022.35 × 469.9 mm (W × H × D)
- Weight
- 197.31 kg (435 lbs)
Key Specifications
Sensitivity: 92 dB
Impedance: 4Ω
Frequency: 21-21000 Hz
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions