MAXX 3 vs Amphion Krypton 3X
The Krypton 3X's sensitivity is 89 dB against the MAXX 3's 91 dB and its low-frequency extension 21 Hz against 20 Hz. Both share impedance (4Ω) and ways (3).
AI-generated product photo — not official manufacturer imagery.
LoudspeakersFloorstanding SpeakersDiscontinued
About the MAXX 3
The Wilson Audio MAXX Series 3 is a large, high-end, four-way floorstanding loudspeaker. Its driver complement comprises a 13-inch woofer, a 10-inch woofer, two 7-inch midrange drivers, and a 1-inch inverted-dome tweeter. The modular enclosure uses Wilson Audio’s proprietary X-material and M4-material construction, with adjustable modules intended to optimize driver time alignment and dispersion. Published specifications include an average in-room frequency response of approximately 19.5 Hz–22.5 kHz, 90–91 dB sensitivity, and a nominal 4-ohm impedance with a 3-ohm minimum. Each speaker measures approximately 67.2 inches high, 16 inches wide, and 24 inches deep, and weighs about 425 pounds. The MAXX Series 3 is known for high dynamics, transparency, deep bass, and expansive soundstage reproduction.
Specifications
Transducer Specifications
Driver and acoustic performance characteristics
- Sensitivity
- 91 dB SPL @ 1W/1m
- Impedance
- 4Ω
- Frequency Response
- 20 Hz - 23 kHz
- Min. Amplifier Power
- 15W
Speaker Design
Driver configuration and enclosure design
- Configuration
- 3-way
- Driver Type
- dynamic
- Driver Size
- 13"
- Driver Count
- 4
Physical Dimensions
Size, weight, and appearance
- Dimensions
- 409.6 × 1722.4 × 616 mm (W × H × D)
- Weight
- 193 kg (425 lbs)
Key Specifications
Sensitivity: 91 dB
Impedance: 4Ω
Frequency: 20-22500 Hz
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions