CS 2.4 vs Anthony Gallo Acoustics Nucleus Reference 3.1
The Nucleus Reference 3.1's sensitivity is 88 dB against the CS 2.4's 87 dB and its low-frequency extension 34 Hz against 33 Hz. Both share impedance (4Ω) and ways (3).
AI-generated product photo — not official manufacturer imagery.
The Thiel CS 2.4 is a three-way floorstanding loudspeaker using all Thiel-designed metal-diaphragm drivers: a 1-inch aluminum dome tweeter coincident with a 3.5-inch aluminum cone midrange sharing a single voice coil, and an 8-inch aluminum cone woofer loaded by an oval passive radiator. The coincident midrange/tweeter uses a mechanical crossover, eliminating the electrical midrange-to-tweeter crossover section for improved phase coherence and resolution. Short-coil/long-gap, copper-stabilized motor systems reduce distortion across all drivers. The cabinet features 1-inch thick walls, a 3-inch thick front baffle, and a sloped baffle for acoustic alignment. Measurements are 41.5 inches high by 11 inches wide by 14 inches deep, at 70 lbs. Frequency response is 33Hz to 37kHz (-3dB), sensitivity 87dB at 2.8V/1m, and nominal impedance 4 ohms (minimum 3 ohms). Recommended amplifier power is 100 to 400 watts. Produced from approximately 2003 to 2012, the CS 2.4 is noted for superb imaging, soundstaging, and neutrality. A Signature Edition (CS 2.4 SE) offered boutique capacitors and cosmetic upgrades.
Driver and acoustic performance characteristics
Driver configuration and enclosure design
Size, weight, and appearance
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions
Estimated price (community-sourced)
Around — community and catalog average, updates slowly
Components that show up alongside the CS 2.4 in real systems. A verdict means the pair has been checked for compatibility and headroom — open it to see how the two get along.
Every pairing for the CS 2.4The closest alternatives on specs, description and the systems they turn up in, with the specs they share set side by side.
The Nucleus Reference 3.1's sensitivity is 88 dB against the CS 2.4's 87 dB and its low-frequency extension 34 Hz against 33 Hz. Both share impedance (4Ω) and ways (3).
The 7B's sensitivity is 86 dB against the CS 2.4's 87 dB, its impedance 6Ω against 4Ω, and its low-frequency extension 35 Hz against 33 Hz. Both share ways (3).
The Helicon 400's sensitivity is 88 dB against the CS 2.4's 87 dB and its low-frequency extension 31.5 Hz against 33 Hz. Both share impedance (4Ω) and ways (3).
Both turn up in the same documented systems.
The CS 6's sensitivity is 86 dB against the CS 2.4's 87 dB and its low-frequency extension 28 Hz against 33 Hz. Both share impedance (4Ω) and ways (3).
Penaudio Chara
Dynaudio Contour 3.3
The specs and the pairings above are open to everyone. Sign up and you get the system builder, the assistant, a compatibility check against the gear you already own, and a watch on this product so a price or pairing change reaches you.
Sign up free