AI-generated product photo — not official manufacturer imagery.
Estimated price (community-sourced)
Around — community and catalog average, updates slowly
The Tandberg TCD-3014a is a high-end stereo cassette deck from Tandberg’s 3000-series family, essentially an updated variant of the TCD-3014 with the same core architecture but minor evolutionary changes. It is a 3-head, 4-motor, microprocessor-controlled deck with discrete record, playback, and erase heads, allowing true off-tape monitoring during recording. The design emphasizes high-linearity analog electronics with extensive use of discrete components, phase-compensated playback amplifiers, and high-grade passive parts to minimize noise and distortion. Like the closely related TCD-3014, the TCD-3014a incorporates Tandberg’s proprietary Dyneq system, which dynamically optimizes record equalization and headroom, and the Actilinear II recording amplifier topology to extend overload margin and improve linearity at high levels. Dolby B and C noise-reduction are standard. Tape handling is via a servo-controlled, closed-loop dual-capstan transport mounted on a heavy aluminum chassis plate, driven by four motors: two reel-hub motors for tape tension and constant speed, a capstan drive with dual flywheels to reduce mechanical resonance and flutter, and a separate motor for smooth, shock-free movement of the head assembly and transport functions. A built-in microcontroller oversees transport logic, memory, auto-wind functions, and tape-time calculation. Front-panel facilities include user-adjustable bias, record sensitivity, and record-head azimuth, plus precision peak-reading meters calibrated to indicate approach to tape saturation. The deck accepts normal, chrome, and metal tapes, achieving with metal tape a specified frequency response of approximately 18 Hz to 23 kHz, signal-to-noise ratio around 74 dB(A) with Dolby C, and wow and flutter around 0.06% WRMS. Total harmonic distortion is typically below 1-2%, depending on tape type and level. An optional infrared remote control, the Tandberg RC-20, provides remote transport operation. Physical dimensions are about 435 x 166 x 350 mm (W x H x D), with a weight around 9.8 kg.
Analog signal output specifications
Input and output connections
Size, weight, and appearance
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions
The closest alternatives on specs, description and the systems they turn up in, with the specs they share set side by side.
The 682 ZX's signal-to-noise is 72 dB against the TCD-3014a's 74 dB, its thd 0.800% against 1.000%, its output impedance 2.2Ω against 8Ω, and its output voltage 1.0V RMS against 0.7V RMS.
The CR-7A's signal-to-noise is 72 dB against the TCD-3014a's 74 dB, its thd 0.800% against 1.000%, its output voltage 1.0V RMS against 0.7V RMS, and its weight 9 kg (20 lbs) against 9.8 kg (22 lbs).
The RX-505's signal-to-noise is 70 dB against the TCD-3014a's 74 dB, its thd 0.900% against 1.000%, its output voltage 1.0V RMS against 0.7V RMS, and its weight 10 kg (22 lbs) against 9.8 kg (22 lbs).
The B215d's signal-to-noise is 72 dB against the TCD-3014a's 74 dB, its thd 0.800% against 1.000%, its output voltage 0.8V RMS against 0.7V RMS, and its weight 9.15 kg (20 lbs) against 9.8 kg (22 lbs).
Nakamichi CR-7
The specs and the pairings above are open to everyone. Sign up and you get the system builder, the assistant, a compatibility check against the gear you already own, and a watch on this product so a price or pairing change reaches you.
Sign up freeSony TC-K870ES