AI-generated product photo — not official manufacturer imagery.
Estimated price (community-sourced)
Around — community and catalog average, updates slowly
The Schiit Audio Saga+ is a single-ended stereo line preamplifier combining a fully passive signal path with a selectable hybrid 6SN7 tube-buffer stage. It uses a relay-switched, discrete thin-film resistor attenuator with 64 one-decibel volume steps, five line-level RCA inputs, two pairs of RCA outputs, front-panel and remote control, and an included tube. In passive mode it functions as a transparent attenuator; in active mode, the tube/BJT buffer provides low output impedance and high voltage swing. It has no phono input, balanced connections, DAC, headphone output, or built-in wireless/network streaming. Schiit has replaced it with the Saga 2, and the Saga+ is listed as discontinued/no longer manufactured.
Amplification power output and characteristics
Analog signal output specifications
Input and output connections
Size, weight, and appearance
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions
Components that show up alongside the Saga+ in real systems. A verdict means the pair has been checked for compatibility and headroom — open it to see how the two get along.
The closest alternatives on specs, description and the systems they turn up in, with the specs they share set side by side.
The Freya+'s signal-to-noise is 120 dB against the Saga+'s 108 dB, its thd 0.004% against 0.001%, its output impedance 75Ω against 180Ω, and its weight 4.99 kg (11 lbs) against 2.268 kg (5 lbs).
Both turn up in the same documented systems.
The Lyr 3's thd is 0.007% against the Saga+'s 0.001%, its output impedance 0.3Ω against 180Ω, its weight 2.72 kg (6 lbs) against 2.268 kg (5 lbs), and its width 229 mm against 228.6 mm.
Both turn up in the same documented systems.
The 114's signal-to-noise is 98 dB against the Saga+'s 108 dB, its thd 0.020% against 0.001%, its output impedance 220Ω against 180Ω, and its weight 3.7 kg (8 lbs) against 2.268 kg (5 lbs).
The NFB-11.28's signal-to-noise is 118 dB against the Saga+'s 108 dB, its thd 0.002% against 0.001%, its output impedance 2Ω against 180Ω, and its weight 2.5 kg (6 lbs) against 2.268 kg (5 lbs).
Lyr Valve
Forte Audio Forte F-44
The specs and the pairings above are open to everyone. Sign up and you get the system builder, the assistant, a compatibility check against the gear you already own, and a watch on this product so a price or pairing change reaches you.
Sign up free