605 vs Audio Research Corporation VS110
The VS110's power @ 8ω is 100W against the 605's 150W, its damping factor 11 against 7, and its input sensitivity 1.1V RMS against 0.6V RMS.
AI-generated product photo — not official manufacturer imagery.
Estimated price (community-sourced)
Around — community and catalog average, updates slowly
The Meridian 605 is a monoblock power amplifier introduced in 1991, capable of delivering 150 watts into an 8 ohm load. It features a frequency response from 20Hz to 20kHz and an input sensitivity of 0.55V. The amplifier uses audio MOSFET output transistors (2SK and 2SJ types) and includes a standard power supply with a 400VA transformer and bridge rectifier, providing approximately ±60V after rectification. A secondary bridge supplies ±20V DC to power the operational amplifier (OP44) via adjustable regulators. The design incorporates a relay to disconnect the mains supply if DC is detected at the audio output stage, enhancing safety. The damping factor of the standard 605 is relatively low (around 7), but can be improved significantly with additional capacitance. The amplifier is known for its robust build with bronze casing and heat sinks, and it is considered vintage but still highly regarded for its sound quality.
Amplification power output and characteristics
Input and output connections
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions
The closest alternatives on specs, description and the systems they turn up in, with the specs they share set side by side.
The VS110's power @ 8ω is 100W against the 605's 150W, its damping factor 11 against 7, and its input sensitivity 1.1V RMS against 0.6V RMS.
The VT100 MkIII's power @ 8ω is 100W against the 605's 150W, its damping factor 12 against 7, and its input sensitivity 1.7V RMS against 0.6V RMS.
The Power 2's power @ 8ω is 110W against the 605's 150W, its damping factor 50 against 7, and its input sensitivity 1.3V RMS against 0.6V RMS.
The Power 2 SE's power @ 8ω is 110W against the 605's 150W, its damping factor 50 against 7, and its input sensitivity 1.3V RMS against 0.6V RMS.
McIntosh MC75
Jeff Rowland Design Group Model 2
The specs and the pairings above are open to everyone. Sign up and you get the system builder, the assistant, a compatibility check against the gear you already own, and a watch on this product so a price or pairing change reaches you.
Sign up free