Snapper vs Audio Analogue AA100DM
The AA100DM's output impedance is 0.25Ω against the Snapper's 5Ω and its weight 15.5 kg (34 lbs) against 18.14 kg (40 lbs). Both share power @ 8ω (100W) and signal-to-noise (110 dB).
AI-generated product photo — not official manufacturer imagery.
Snapper
Manley LaboratoriesAmplifiersPower AmplifiersTube AmplifiersDiscontinued
Estimated price (community-sourced)
$4,950
Around — community and catalog average, updates slowly
About the Snapper
The Manley Snapper is a pair of high-end monoblock amplifiers known for their robust performance and precise audio delivery. Each amplifier is capable of producing 100 watts of power, with a frequency response spanning from about 15 Hz to 40 kHz into a 5-ohm load. They utilize an EL-34 output stage in a partial triode (ultralinear) configuration, ensuring a balanced signal path from input to output. The amplifiers support both single-ended and balanced inputs, with switch-selectable RCA unbalanced inputs and XLR balanced inputs. The input sensitivity for RCA is 800 mV RMS, while for XLR it is 1.6 V RMS. The overall voltage gain from the RCA jack to output is about 32 dBu. The signal-to-A-weighted noise ratio is approximately 110 dB, indicating a very low noise floor. The amplifiers are physically substantial, measuring 13.5 inches wide, 15 inches deep, and 9 inches high, with each unit weighing about 40 pounds.
Specifications
Power Specifications
Amplification power output and characteristics
- Power @ 8Ω
- 100W @ 8Ω
Analog Output
Analog signal output specifications
- SNR
- 110 dB
- Output Impedance
- 5Ω
Connectivity
Input and output connections
- Analog Inputs
- RCA, XLR
Physical Dimensions
Size, weight, and appearance
- Dimensions
- 342.9 × 228.6 × 381 mm (W × H × D)
- Weight
- 18.14 kg (40 lbs)
Key Specifications
Power: 100W
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions