CC3 vs Dynaudio Contour S C
The Contour S C's low-frequency extension is 65 Hz against the CC3's 80 Hz. Both share sensitivity (86 dB), impedance (4Ω), and ways (2).
AI-generated product photo — not official manufacturer imagery.
The Magnepan CC-3 center channel speaker uses two planar-magnetic drivers with a crossover point at 900Hz, covering a frequency range from approximately 80Hz to 20kHz. It features a 31" x 2.5" tweeter (32.5 square inches) and a 155 square inch bass driver. The speaker weighs about 15 pounds and measures 36" wide, 11" high, and 5.5" deep, which is nearly 3" less deep than its predecessor, the CC-2. A unique design element is a flat section in the center of the speaker that reduces bass cancellation typical in small dipolar speakers, effectively extending the bass response by an octave. This makes the CC-3 suitable for use with bass management systems or subwoofers, providing a full-range center channel solution without added circuitry complexity. Sensitivity is rated at 85-86 dB at 2.83V/m, and it handles recommended power between 50 and 250 watts. The CC-3 is praised for its wide dispersion, full-range extension, and natural sound, making it arguably the best center channel Magnepan has produced. It is designed to integrate well with Magnepan's left and right speakers for a cohesive surround sound experience.
Driver and acoustic performance characteristics
Driver configuration and enclosure design
Size, weight, and appearance
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions
Estimated price (community-sourced)
Around — community and catalog average, updates slowly
Components that show up alongside the CC3 in real systems. A verdict means the pair has been checked for compatibility and headroom — open it to see how the two get along.
The closest alternatives on specs, description and the systems they turn up in, with the specs they share set side by side.
The Contour S C's low-frequency extension is 65 Hz against the CC3's 80 Hz. Both share sensitivity (86 dB), impedance (4Ω), and ways (2).
The CM C's sensitivity is 85 dB against the CC3's 86 dB, its impedance 8Ω against 4Ω, and its high-frequency extension 22 kHz against 20 kHz. Both share ways (2).
The Chorus CC 800V's sensitivity is 91 dB against the CC3's 86 dB and its low-frequency extension 61 Hz against 80 Hz. Both share impedance (4Ω) and ways (2).
The Matrix HTM's sensitivity is 89 dB against the CC3's 86 dB and its impedance 8Ω against 4Ω. Both share high-frequency extension (20 kHz) and ways (2).
Aerial Acoustics CC3
KEF Reference Model 100
The specs and the pairings above are open to everyone. Sign up and you get the system builder, the assistant, a compatibility check against the gear you already own, and a watch on this product so a price or pairing change reaches you.
Sign up free