Fritz REV 5 SE Main vs Sonus Faber Liuto
The Liuto's sensitivity is 86 dB against the Fritz REV 5 SE Main's 85.5 dB and its woofer 6" against 5.5". Both share impedance (8Ω) and ways (2).
AI-generated product photo — not official manufacturer imagery.
LoudspeakersBookshelf SpeakersDiscontinued
Estimated price (community-sourced)
$1,950original retail
Original retail — discontinued, no used price recorded yet
About the Fritz REV 5 SE Main
The Fritz REV 5 SE is a compact, rear-ported two-way monitor loudspeaker using a Scan-Speak 5.5-inch Revelator mid/woofer and a Scan-Speak 28 mm (1.1-inch) hand-coated textile soft-dome tweeter. Its minimalist series crossover uses a 6 dB/octave slope and no capacitors in the tweeter circuit. The speaker has an 8-ohm nominal impedance, 85.5 dB sensitivity (2.83 V at 1 m), and a stated frequency response of 45 Hz–20 kHz. The woofer’s free-air resonance is 30 Hz, while the rear port is tuned for reinforcement at approximately 45 Hz. Each cabinet measures 13 inches high, 7.5 inches wide, and 12 inches deep, and weighs 24 pounds. Recommended amplification is 30–150 watts per channel. The compact cabinet is available with real-wood veneer finishes and magnetically attached grilles.
Specifications
Transducer Specifications
Driver and acoustic performance characteristics
- Sensitivity
- 85.5 dB SPL @ 1W/1m
- Impedance
- 8Ω
- Frequency Response
- 45 Hz - 20 kHz
Speaker Design
Driver configuration and enclosure design
- Configuration
- 2-way
- Driver Type
- dynamic
- Driver Size
- 5.5"
- Driver Count
- 2
- Enclosure Type
- ported
Physical Dimensions
Size, weight, and appearance
- Dimensions
- 190.5 × 330.2 × 304.8 mm (W × H × D)
- Weight
- 10.89 kg (24 lbs)
- Available Colors
- Real wood veneer
Key Specifications
Sensitivity: 85.5 dB
Impedance: 8Ω
Frequency: 45-20000 Hz
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions