AI-generated product photo — not official manufacturer imagery.
Estimated price (community-sourced)
Around — community and catalog average, updates slowly
The Eversolo DAC-Z10 is a flagship desktop digital-to-analog converter, balanced preamplifier, and headphone amplifier built on Eversolo's Fully Isolated Architecture (FIA), which completely separates digital and analog domains and galvanically isolates all inputs to minimize interference and ground loops. It uses a dual-mono AKM architecture with AK4191+AK4499 per channel, delivering ultra-low distortion and noise, with XLR output performance measured at THD+N 0.00008% and 130 dB SNR/dynamic range. A multi-stage low-noise power supply with three dedicated linear/toroidal transformer supplies independently powers the left analog, right analog, and digital sections to reduce cross-interference. Digital inputs include USB Audio, dual optical, dual coaxial, AES/EBU, I2S, and HDMI ARC/eARC, all with electrical isolation, plus Bluetooth via a Qualcomm QCC5125 module; high-resolution formats up to PCM 768 kHz/32-bit and DSD512 Native are supported via USB/I2S. The analog section incorporates a fully balanced preamp with XLR and RCA inputs/outputs, up to +10 dB analog gain, and R2R ladder attenuator volume control for the pre-out. A dedicated 6.35mm headphone amplifier module provides auto-impedance detection, three gain levels, and up to 1W into 16-32 ohms, covering a wide range of hi-fi headphones. Usability is centered around an 8.8-inch IPS touchscreen, complemented by IR remote and mobile app control. The chassis is made from aluminum alloy with a compact footprint of 310 x 88 x 365 mm (W x H x D).
DAC capabilities and digital audio processing
Analog signal output specifications
Input and output connections
Size, weight, and appearance
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions
Components that show up alongside the DAC-Z10 in real systems. A verdict means the pair has been checked for compatibility and headroom — open it to see how the two get along.
The closest alternatives on specs, description and the systems they turn up in, with the specs they share set side by side.
The XDA-3's signal-to-noise is 110 dB against the DAC-Z10's 130 dB and its thd 0.001% against 0.000%. Both share bit depth (32-bit) and max sample rate (768 kHz).
The DMP-A8's signal-to-noise is 128 dB against the DAC-Z10's 130 dB. Both share bit depth (32-bit), max sample rate (768 kHz), and thd (0.000%).
Both turn up in the same documented systems.
The D9's signal-to-noise is 118 dB against the DAC-Z10's 130 dB and its thd 0.001% against 0.000%. Both share bit depth (32-bit) and max sample rate (768 kHz).
The 7000A's signal-to-noise is 110 dB against the DAC-Z10's 130 dB and its thd 0.001% against 0.000%. Both share bit depth (32-bit) and max sample rate (768 kHz).
Topping DX9 Discrete
The specs and the pairings above are open to everyone. Sign up and you get the system builder, the assistant, a compatibility check against the gear you already own, and a watch on this product so a price or pairing change reaches you.
Sign up free