No Image
AmplifiersPower AmplifiersDiscontinued
Estimated price (community-sourced)
$618.88
Around — community and catalog average, updates slowly
About the POA-2200
The Denon POA-2200 is a vintage, solid-state stereo power amplifier introduced in the mid-1980s. It uses a dual no-feedback amplifier design and a high-current, four-parallel push-pull output stage. It provides separate channel level controls, Normal and CD Direct inputs, switchable A/B speaker outputs, and a front-panel diagnostic display for abnormal temperature rise. Published ratings vary by measurement standard; specifications below reflect commonly reported figures.
Specifications
Type: Solid-state stereo power amplifier
Rated output: 200–220 W per channel into 8 Ω (20 Hz–20 kHz; figures vary by source and rating standard)
Dynamic power: 450 W per channel into 4 Ω; 600 W per channel into 2 Ω
Total harmonic distortion: 0.002% (reported)
Frequency response: 1 Hz–300 kHz (+0/−3 dB, 1 W)
Power bandwidth: 5 Hz–80 kHz (8 Ω, 0.03% THD)
Input sensitivity/impedance: Normal 1 V/25 kΩ; CD Direct approximately 1.3 V/30 kΩ
Signal-to-noise ratio: approximately 123 dB (A-weighted)
Slew rate: ±500 V/µs
Output impedance: 0.1 Ω or less
Speaker loads: 6–16 Ω for A or B; 12–16 Ω for A+B
Power consumption: approximately 320–340 W
Dimensions: approximately 434 × 184 × 418 mm (W × H × D)
Weight: approximately 17.3 kg