DLS300 vs Wharfedale PowerCube SPC-8
The PowerCube SPC-8's power @ 8ω is 150W against the DLS300's 100W and its signal-to-noise 85 dB against 90 dB. Both share impedance (8Ω) and ways (1).
AI-generated product photo — not official manufacturer imagery.
About the DLS300
The Dayton Audio DLS300-632 Powered Subwoofers each include a single down-firing 10" long throw coated paper driver with foam surround and vented pole piece. They are bass reflex loaded with a flared front port inside a 3/4" MDF internally braced black ash vinyl veneer enclosure. The subwoofers use solid-state class-A/B amplifiers with gold-plated line-level and speaker-level inputs and outputs. Controls include a phase reversal switch, gain control, auto on/off with LED indicator, a variable controlled 12dB electronic low pass filter, and a 6dB high pass filter. The frequency response is 25-160Hz (±3dB), with a power output of 100 watts RMS into 8 ohms at 0.1% THD, and a signal to noise ratio of 90dB A-weighted. The crossover frequency control is continuously variable from 40-160Hz at 12dB/octave, and the 6dB high pass circuit is set at 125Hz at 8 ohms.
Specifications
Transducer Specifications
Driver and acoustic performance characteristics
- Impedance
- 8Ω
- Frequency Response
- 25 Hz - 160 Hz
- Power Handling
- 100W
Power Specifications
Amplification power output and characteristics
- Power @ 8Ω
- 100W @ 8Ω
- Amplifier Class
- AB
Speaker Design
Driver configuration and enclosure design
- Configuration
- 1-way
- Driver Type
- dynamic
- Driver Size
- 10"
- Driver Count
- 1
- Enclosure Type
- ported
- Crossover Frequency
- 160 Hz
Connectivity
Input and output connections
- Bluetooth
- No
- Wi-Fi
- No
- Ethernet
- No
- Analog Inputs
- line-level, speaker-level
Key Specifications
Impedance: 8Ω
Power: 100W
Frequency: 25-160 Hz
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions