ZL200 vs ZL-120V2SE
The ZL-120V2SE's power @ 8ω is 120W against the ZL200's 180W and its power @ 4ω 200W against 260W. Both share output impedance (47Ω) and input sensitivity (2.0V RMS).
Both turn up in the same documented systems.
AI-generated product photo — not official manufacturer imagery.
Estimated price (community-sourced)
Around — community and catalog average, updates slowly
The Concert Fidelity ZL-200 is a high-end monoblock power amplifier designed with an idealist, minimalist, and non-compromise philosophy. It uses a simple circuit with a minimum number of components and four pairs of output MOS-FETs per monoblock in a BTL (Bridge-Tied Load) configuration. The amplifier delivers 180 watts into 8 ohms and 260 watts into 4 ohms, with a frequency response from 0.5Hz to 30kHz at ±0dB and extending to 100kHz at -0.8dB at low power. It features RCA inputs only, an input impedance of 47kΩ, and an input sensitivity of 2V for rated power. Voltage gain is 20dB. The power supply supports multiple voltages (100-240VAC) with dedicated transformers per country. Power consumption is 240W during operation at 120VAC. The amplifier is built to order, weighs approximately 35kg per monoblock, and measures 450mm wide, 180mm high, and 480mm deep. The ZL-200 received The Absolute Sound 2012 Editor's Choice Award from Harry Pearson, founder of The Absolute Sound magazine, recognizing its exceptional performance and design. It is highly regarded for its high speed, delicacy, and exquisite rendition of details and micro dynamics, making it suitable for driving less efficient loudspeakers with authority while maintaining musicality and precision.
Amplification power output and characteristics
Analog signal output specifications
Input and output connections
Size, weight, and appearance
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions
The closest alternatives on specs, description and the systems they turn up in, with the specs they share set side by side.
The ZL-120V2SE's power @ 8ω is 120W against the ZL200's 180W and its power @ 4ω 200W against 260W. Both share output impedance (47Ω) and input sensitivity (2.0V RMS).
Both turn up in the same documented systems.
The Amp-1-sublime's power @ 8ω is 150W against the ZL200's 180W, its power @ 4ω 300W against 260W, and its output impedance 0.1Ω against 47Ω. Both share input impedance (47000Ω).
The Grandioso M1X's power @ 8ω is 300W against the ZL200's 180W, its power @ 4ω 600W against 260W, its output impedance 0.1Ω against 47Ω, and its input sensitivity 1.0V RMS against 2.0V RMS.
The Aelius II's power @ 8ω is 200W against the ZL200's 180W, its power @ 4ω 350W against 260W, its output impedance 0.25Ω against 47Ω, and its input impedance 47Ω against 47000Ω.
McIntosh MC301
The specs and the pairings above are open to everyone. Sign up and you get the system builder, the assistant, a compatibility check against the gear you already own, and a watch on this product so a price or pairing change reaches you.
Sign up free