CP-700 vs NAD S100
The S100's signal-to-noise is 97 dB against the CP-700's 100 dB, its mm gain 40 dB against 42 dB, and its mc gain 60 dB against 72 dB. Both share thd (0.001%).
AI-generated product photo — not official manufacturer imagery.
The Classé CP-700 is a sophisticated preamplifier from the Classé Delta series, designed with cutting-edge balanced circuit topologies to optimize noise reduction and dynamic performance. It features a fully balanced design with a signal-to-noise ratio of 100dB over a frequency range of 20Hz to 500kHz. The power supply is housed in a separate chassis to enhance isolation and reduce interference, utilizing one transformer with five separate secondary windings for audio and control circuits, and another transformer dedicated to sensor and protection circuits. The total harmonic distortion plus noise is impressively low at 0.0012%. The CP-700 employs a unique double cross-balanced approach in its gain stages, with six signal paths per channel including inverting, non-inverting balanced circuits, and a single-ended circuit. This design contributes to its clean, detailed sound quality. The preamplifier also includes two separate volume controls for each channel and selectable gain settings to accommodate both low-output moving coil (MC) and high-output moving magnet (MM) cartridges, with gains of 72 dB and 42 dB respectively. The unit is designed with high-quality components such as low-noise film resistors and capacitors to ensure superior audio fidelity. Overall, the CP-700 is recognized for its meticulous engineering and excellent sonic performance, making it a top-tier choice for audiophiles seeking a high-end preamplifier.
Analog signal output specifications
Phono stage specifications
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions
Estimated price (community-sourced)
Around — community and catalog average, updates slowly
The closest alternatives on specs, description and the systems they turn up in, with the specs they share set side by side.
The S100's signal-to-noise is 97 dB against the CP-700's 100 dB, its mm gain 40 dB against 42 dB, and its mc gain 60 dB against 72 dB. Both share thd (0.001%).
The Halo HINT 6's signal-to-noise is 103 dB against the CP-700's 100 dB, its mm gain 41 dB against 42 dB, its thd 0.050% against 0.001%, and its mc gain 54 dB against 72 dB.
The 33's signal-to-noise is 108 dB against the CP-700's 100 dB, its mm gain 46 dB against 42 dB, and its mc gain 63.5 dB against 72 dB. Both share thd (0.001%).
The Ruby P-1's signal-to-noise is 98 dB against the CP-700's 100 dB, its mm gain 40 dB against 42 dB, its thd 0.000% against 0.001%, and its mc gain 80 dB against 72 dB.
CP-500
McIntosh C47
The specs and the pairings above are open to everyone. Sign up and you get the system builder, the assistant, a compatibility check against the gear you already own, and a watch on this product so a price or pairing change reaches you.
Sign up free