HA3000 vs NVO Audio SPA-One SE
The SPA-One SE's mm gain is 50 dB against the HA3000's 44 dB, its mc gain 60 dB against 74 dB, its output impedance 10Ω against 50Ω, and its input impedance 1000Ω against 50Ω.
AI-generated product photo — not official manufacturer imagery.
The Allnic HA-3000 is a high-gain nuvistor tube MC phono head amplifier (head amp / pre-preamplifier) designed to sit between a low-output moving coil cartridge and a MM phono stage, providing active gain with very low noise and high transparency. It is a two-chassis, all-tube design with a separate tube-rectified and regulated power supply, using a pair of NOS 7895 nuvistor tubes for amplification and additional tubes (including 7233 and 6BH6) in the power supply. The HA-3000 offers four selectable input load impedances of 50, 100, 200, and 500 ohms via a front-panel rotary control to optimize matching with different MC cartridges. Voltage gain is fixed at 30 dB, making it suitable for low-output MC cartridges in roughly the 0.2-0.5 mV range when feeding a standard MM input. Inputs and outputs are single-ended RCA only, intended specifically to feed the MM input of a downstream phono preamp rather than to function as a full phono stage or line preamplifier. The circuitry, including the nuvistors, is mechanically isolated on a rubber-suspended board to reduce microphonics, contributing to the unit's reputation for high resolution, low noise, fast transient response, and strong bass performance while maintaining tube naturalness. Built in limited numbers and long discontinued, it is considered a rare and sought-after MC head amp that appears infrequently on the used market.
Amplification power output and characteristics
Analog signal output specifications
Phono stage specifications
Input and output connections
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions
Estimated price (community-sourced)
Around — community and catalog average, updates slowly
The closest alternatives on specs, description and the systems they turn up in, with the specs they share set side by side.
The SPA-One SE's mm gain is 50 dB against the HA3000's 44 dB, its mc gain 60 dB against 74 dB, its output impedance 10Ω against 50Ω, and its input impedance 1000Ω against 50Ω.
The PS3 MkII's mc gain is 72 dB against the HA3000's 74 dB, its mm gain 53 dB against 44 dB, and its input impedance 47000Ω against 50Ω. Both share output impedance (50Ω).
The Ambrosia 2000 Second Edition's mm gain is 42 dB against the HA3000's 44 dB, its mc gain 64 dB against 74 dB, and its input impedance 1000Ω against 50Ω. Both share output impedance (50Ω).
The C-57's mc gain is 64 dB against the HA3000's 74 dB, its mm gain 34 dB against 44 dB, and its input impedance 1000Ω against 50Ω. Both share output impedance (50Ω).
European Audio Team (EAT) E.A.T. E-Glo FB
The specs and the pairings above are open to everyone. Sign up and you get the system builder, the assistant, a compatibility check against the gear you already own, and a watch on this product so a price or pairing change reaches you.
Sign up free