AI-generated product photo — not official manufacturer imagery.
Estimated price (community-sourced)
Around — community and catalog average, updates slowly
The Aerial Acoustics Model 10T v2 is a high-end three-way, floorstanding dynamic loudspeaker with a bass-reflex (ported) enclosure and a separate tweeter/midrange head module. The design uses independently optimized enclosures: a substantial vented bass cabinet with thick, heavily braced MDF walls, and an upper "head" for the midrange and tweeter that is cast from high-density Novalith™ acoustical composite, making it extremely inert and non-resonant. The Novalith head is a complex, faceted shape that mounts on a steel post above the bass enclosure and can be rotated to optimize imaging at the listening position, while the bass cabinet uses a large rear-firing port and rigid construction for clean low-frequency output. The 10T v2 employs custom-designed drivers: a 1" titanium-dome tweeter with a large rear chamber, a 5.3" (136 mm) dual Kevlar/epoxy-laminated cone midrange, and a 10.7" (271 mm) bilaminate composite-cone woofer. The midrange and woofer use cast magnesium frames, large vented magnet structures, and long linear excursions to maintain low distortion and high power handling over their operating ranges. The crossover is a fourth-order (24 dB/octave) Linkwitz-Riley acoustic network with crossover points at 360 Hz and 2.7 kHz, using precision components including polypropylene capacitors, air-core inductors with low-oxygen copper windings, high-current nickel-steel-core inductors in the bass section, and 99.997% pure copper internal wiring on separate glass-epoxy circuit boards for bass and mid/treble sections. Performance specifications include a frequency response of 28 Hz-20 kHz (-2 dB, -6 dB at 23 Hz), sensitivity of 86 dB (2.83 V/1 m), and nominal impedance of 4 Ω (3 Ω minimum). Recommended amplifier power is 50 W minimum, with >100 W suggested for best dynamic performance. The 10T v2 is bi-wirable/bi-ampable with two pairs of gold-plated five-way binding posts at the bottom of the bass cabinet. A 6"-tall, sand-fillable dedicated stand for the bass cabinet is available as an option. Cabinet dimensions are approximately 41.5" H x 13.75" W x 19" D, shipping in three cartons at a total weight around 190 lb. The system is voiced for high transparency, accurate tonal balance, strong dynamics, precise imaging, and authoritative, well-controlled bass, with a clear, natural midrange and refined, extended treble.
Driver and acoustic performance characteristics
Driver configuration and enclosure design
Size, weight, and appearance
Specifications are community-contributed and may not be accurate or complete. Verify all details with the manufacturer before making purchasing decisions. Terms & Conditions
The closest alternatives on specs, description and the systems they turn up in, with the specs they share set side by side.
The 8B's impedance is 6Ω against the 10T V2's 4Ω. Both share sensitivity (86 dB), low-frequency extension (28 Hz), and woofer (10.7").
Both turn up in the same documented systems.
The Venere 3.0's impedance is 6Ω against the 10T V2's 4Ω, its sensitivity 90 dB against 86 dB, and its low-frequency extension 38 Hz against 28 Hz. Both share ways (3).
The Confidence C2 Platinum's sensitivity is 87 dB against the 10T V2's 86 dB and its high-frequency extension 25 kHz against 20 kHz. Both share impedance (4Ω) and low-frequency extension (28 Hz).
The Helicon 400's sensitivity is 88 dB against the 10T V2's 86 dB and its low-frequency extension 31.5 Hz against 28 Hz. Both share impedance (4Ω) and ways (3).
10T
The specs and the pairings above are open to everyone. Sign up and you get the system builder, the assistant, a compatibility check against the gear you already own, and a watch on this product so a price or pairing change reaches you.
Sign up free8