AI-generated approximation — the photo is a staged composite for illustration (relative sizing of the components may be off) and the write-up was drafted from the component specs. Nobody has listened to this system.
A vinyl-first setup built around a classic LP12 turntable, a tube phono stage, a tube line preamp and a tube power amp driving sensitive vintage-style speakers. It delivers a warm, natural midrange that brings vocals and acoustic instruments close, while trading off the deepest bass weight of larger modern towers.
TURNTABLE
PHONO PREAMP
PREAMP
POWER AMP
SPEAKERS
Read from the component list, not from listening.
Lowest frequency response across the system’s components. Approximate — a component is excluded only when it declares an amplifier wattage without also declaring a sensitivity figure, so an amplifier that happens to report a sensitivity slips through and can pull the reading down.
Speaker sensitivity normalised to 8 ohms. Approximate — we do not record whether a figure was quoted per watt or per 2.83 volts, so a non-8-ohm speaker can be out by up to 3 dB.
Scroll sideways to follow the chain from source to speakers.
No products in this system
This system doesn't have any products yet.
Built September 2026 · Updated 2 days ago · v1